Mechanical & Materials Engineering

Research Output 1977 2020

Filter
Article
2018
1 Citation (Scopus)

Influence of reinforcement particles on the mechanism of the blasting erosion arc machining of SiC/Al composites

Gu, L., Chen, J., Zhu, Y., Zhao, W. & Rajurkar, K. P., Nov 1 2018, In : International Journal of Advanced Manufacturing Technology. 99, 5-8, p. 1119-1129 11 p.

Research output: Contribution to journalArticle

Blasting
Erosion
Reinforcement
Machining
Composite materials
3 Citations (Scopus)

Interfacial characterization by pull-out test of bamboo fibers embedded in Poly(lactic acid)

Viel, Q., Esposito, A., Saiter, J. M., Santulli, C. & Turner, J. A., Mar 1 2018, In : Fibers. 6, 1, 7.

Research output: Contribution to journalArticle

Bamboo
Lactic acid
Fibers
Application programs
Shear strength
8 Citations (Scopus)

Investigation of femtosecond laser induced ripple formation on copper for varying incident angle

Zuhlke, C. A., Tsibidis, G. D., Anderson, T., Stratakis, E., Gogos, G. & Alexander, D. R., Jan 1 2018, In : AIP Advances. 8, 1, 015212.

Research output: Contribution to journalArticle

ripples
copper
incidence
pulses
lasers

Investigation of toppling ball flight in American football with a mechanical field-goal kicker

Pfeifer, C. M., Gay, T. J., Hawks, J. A., Farritor, S. M. & Burnfield, J. M., Jun 1 2018, In : Sports Engineering. 21, 2, p. 95-102 8 p.

Research output: Contribution to journalArticle

Football
Projectiles
Ball
Trajectories
Projectile
1 Citation (Scopus)

In vitro measurements of hemodynamic forces and their effects on endothelial cell mechanics at the sub-cellular level

Lambert, L. M., Pipinos, I. I., Baxter, B. T., Chatzizisis, I. S., Ryu, S., Leighton, R. I. & Wei, T., Nov 1 2018, In : Biomicrofluidics. 12, 6, 064101.

Research output: Contribution to journalArticle

hemodynamics
Endothelial cells
Hemodynamics
Mechanics
Shear stress
2 Citations (Scopus)

Mechanical behavior of tensegrity structures with High-mode imperfections

Cai, J., Wang, X., Yang, R. & Feng, J., Dec 2018, In : Mechanics Research Communications. 94, p. 58-63 6 p.

Research output: Contribution to journalArticle

tensegrity structures
struts
Defects
Struts
defects
2 Citations (Scopus)

Mechanical characterizations of 3D-printed PLLA/steel particle composites

Mozafari, H., Dong, P., Hadidi, H., Sealy, M. P. & Gu, L., Jan 1 2018, In : Materials. 12, 1, 1.

Research output: Contribution to journalArticle

Open Access
Steel
Lactic acid
Elastic moduli
Composite materials
Volume fraction
3 Citations (Scopus)

Migration resistance of esophageal stents: The role of stent design

Mozafari, H., Dong, P., Zhao, S., Bi, Y., Han, X. & Gu, L., Sep 1 2018, In : Computers in Biology and Medicine. 100, p. 43-49 7 p.

Research output: Contribution to journalArticle

Stents
Esophagus
Friction
Struts
Esophageal Neoplasms

Modeling study of the hydrodynamic arc breaking mechanism in BEAM

Zhao, W., Gu, L., Zhang, F. & Rajurkar, K. P., Jan 1 2018, In : CIRP Annals. 67, 1, p. 189-192 4 p.

Research output: Contribution to journalArticle

Blasting
Erosion
Machining
Hydrodynamics
Temperature distribution
6 Citations (Scopus)

Monoclonal Cell Line Generation and CRISPR/Cas9 Manipulation via Single-Cell Electroporation

Yang, R., Lemaître, V., Huang, C., Haddadi, A., McNaughton, R. & Espinosa, H. D., Mar 22 2018, In : Small. 14, 12, 1702495.

Research output: Contribution to journalArticle

Clustered Regularly Interspaced Short Palindromic Repeats
Electroporation
Cells
Cell Line
Genes
16 Citations (Scopus)

Nanobead-on-string composites for tendon tissue engineering

Rinoldi, C., Kijeńska, E., Chlanda, A., Choinska, E., Khenoussi, N., Tamayol, A., Khademhosseini, A. & Swieszkowski, W., Jan 1 2018, In : Journal of Materials Chemistry B. 6, 19, p. 3116-3127 12 p.

Research output: Contribution to journalArticle

Tendons
Tissue engineering
Scaffolds
Silicon Dioxide
Silica
8 Citations (Scopus)

Nanofibrous scaffolds with biomimetic structure

Khalili, S., Nouri Khorasani, S., Razavi, M., Hashemi Beni, B., Heydari, F. & Tamayol, A., Feb 1 2018, In : Journal of Biomedical Materials Research - Part A. 106, 2, p. 370-376 7 p.

Research output: Contribution to journalArticle

Biomimetics
Scaffolds (biology)
Scaffolds
Elastin
Fibroblasts
1 Citation (Scopus)

Nanofinishing of microslots on surgical stainless steel by abrasive flow finishing process: Experimentation and modeling

Singh, S., Kumar, D., Sankar, M. R. & Rajurkar, K., Jun 1 2018, In : Journal of Micro and Nano-Manufacturing. 6, 2, 021005.

Research output: Contribution to journalArticle

Stainless Steel
Abrasives
Stainless steel
Surface roughness
Stents
1 Citation (Scopus)

Neuroprotective and anti-inflammatory effects of Rhus coriaria extract in a mouse model of ischemic optic neuropathy

Khalilpour, S., Behnammanesh, G., Suede, F., Ezzat, M. O., Muniandy, J., Tabana, Y., Ahamed, M. B. K., Tamayol, A., Majid, A. M. S., Sangiovanni, E., Dell'Agli, M. & Majid, A. S., Jun 1 2018, In : Biomedicines. 6, 2, 48.

Research output: Contribution to journalArticle

Rhus
Ischemic Optic Neuropathy
Linoleic Acid
Optic Nerve Injuries
Nerve Crush
2 Citations (Scopus)

On the Measurement of Energy Dissipation of Adhered Cells with the Quartz Microbalance with Dissipation Monitoring

Monemian Esfahani, A., Zhao, W., Chen, J. Y., Huang, C., Xi, N., Xi, J. & Yang, R., Sep 4 2018, In : Analytical chemistry. 90, 17, p. 10340-10349 10 p.

Research output: Contribution to journalArticle

Quartz
Quartz crystal microbalances
Energy dissipation
Cell adhesion
Monitoring
20 Citations (Scopus)

Patient-Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds

Faramarzi, N., Yazdi, I. K., Nabavinia, M., Gemma, A., Fanelli, A., Caizzone, A., Ptaszek, L. M., Sinha, I., Khademhosseini, A., Ruskin, J. N. & Tamayol, A., Jun 6 2018, In : Advanced Healthcare Materials. 7, 11, 1701347.

Research output: Contribution to journalArticle

Bioprinting
Tissue Scaffolds
Platelet-Rich Plasma
Tissue Engineering
Scaffolds (biology)

Performance of a Multifunctional Robot for Natural Orifice Transluminal Endoscopic Surgery

Shen, T., Hennings, D., Nelson, C. A. & Oleynikov, D., Aug 1 2018, In : Surgical Innovation. 25, 4, p. 364-373 10 p.

Research output: Contribution to journalArticle

Natural Orifice Endoscopic Surgery
Robotics
Skin
3 Citations (Scopus)

Plaque burden influences accurate classification of fibrous cap atheroma by in vivo optical coherence tomography in a porcine model of advanced coronary atherosclerosis

Poulsen, C. B., Pedrigi, R. M., Pareek, N., Kilic, I. D., Holm, N. R., Bentzon, J. F., Bøtker, H. E., Falk, E., Krams, R. & De Silva, R., Nov 2018, In : EuroIntervention. 14, 10, p. 1129-1135 7 p.

Research output: Contribution to journalArticle

Optical Coherence Tomography
Atherosclerotic Plaques
Coronary Artery Disease
Swine
Tunica Intima
2 Citations (Scopus)

Pneumatic microfluidic cell compression device for high-throughput study of chondrocyte mechanobiology

Lee, D., Erickson, A., You, T., Dudley, A. T. & Ryu, S., Jan 1 2018, In : Lab on a Chip. 18, 14, p. 2077-2086 10 p.

Research output: Contribution to journalArticle

Biophysics
Microfluidics
Cartilage
Chondrocytes
Compressive stress
3 Citations (Scopus)

Polarized Raman Analysis of Polymer Chain Orientation in Ultrafine Individual Nanofibers with Variable Low Crystallinity

Papkov, D., Pellerin, C. & Dzenis, Y. A., Nov 13 2018, In : Macromolecules. 51, 21, p. 8746-8751 6 p.

Research output: Contribution to journalArticle

Nanofibers
Polymers
Ultrafine
Toughness
Microscopic examination
18 Citations (Scopus)

Prevascularization of 3D printed bone scaffolds by bioactive hydrogels and cell co-culture

Kuss, M. A., Wu, S., Wang, Y., Untrauer, J. B., Li, W., Lim, J. Y. & Duan, B., Jul 2018, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106, 5, p. 1788-1798 11 p.

Research output: Contribution to journalArticle

Hydrogels
Scaffolds
Bone
Hydrogel
Endothelial cells
25 Citations (Scopus)

Rapid prototyping of whole-thermoplastic microfluidics with built-in microvalves using laser ablation and thermal fusion bonding

Shaegh, S. A. M., Pourmand, A., Nabavinia, M., Avci, H., Tamayol, A., Mostafalu, P., Ghavifekr, H. B., Aghdam, E. N., Dokmeci, M. R., Khademhosseini, A. & Zhang, Y. S., Jan 1 2018, In : Sensors and Actuators, B: Chemical. 255, p. 100-109 10 p.

Research output: Contribution to journalArticle

rapid prototyping
Rapid prototyping
Laser ablation
Microfluidics
polymethyl methacrylate
Hofstede
Small and medium-sized enterprises
Micro-enterprises
Enterprise performance
Firm-specific factors
7 Citations (Scopus)

Robotic ventral hernia repair is not superior to laparoscopic: a national database review

Armijo, P., Pratap, A., Wang, Y., Shostrom, V. & Oleynikov, D., Apr 1 2018, In : Surgical endoscopy. 32, 4, p. 1834-1839 6 p.

Research output: Contribution to journalArticle

Ventral Hernia
Herniorrhaphy
Robotics
Databases
Opiate Alkaloids
7 Citations (Scopus)

Scalable Culturing of Primary Human Glioblastoma Tumor-Initiating Cells with a Cell-Friendly Culture System

Li, Q., Lin, H., Rauch, J., Deleyrolle, L. P., Reynolds, B. A., Viljoen, H. J., Zhang, C., Gu, L., Van Wyk, E. & Lei, Y., Dec 1 2018, In : Scientific reports. 8, 1, 3531.

Research output: Contribution to journalArticle

Neoplastic Stem Cells
Glioblastoma
Cell Culture Techniques
Drug Discovery
Costs and Cost Analysis

Semi-analytical source method for reaction⇓diffusion problems

Cole, K. D., Cetin, B. & Demirel, Y., Jun 2018, In : Journal of Heat Transfer. 140, 6, 061301.

Research output: Contribution to journalArticle

Vinyl Chloride
heat balance
mass balance
Biological systems
Green's function
2 Citations (Scopus)

Single-cell membrane drug delivery using porous pen nanodeposition

Yang, Y., Yu, J., Monemian Esfahani, A., Seiffert-Sinha, K., Xi, N., Lee, I., Sinha, A. A., Chen, L., Sun, Z., Yang, R. & Dong, L., Jul 14 2018, In : Nanoscale. 10, 26, p. 12704-12712 9 p.

Research output: Contribution to journalArticle

Cell membranes
Drug delivery
Membranes
Molecules
Calcium
20 Citations (Scopus)

Smart Bandage for Monitoring and Treatment of Chronic Wounds

Mostafalu, P., Tamayol, A., Rahimi, R., Ochoa, M., Khalilpour, A., Kiaee, G., Yazdi, I. K., Bagherifard, S., Dokmeci, M. R., Ziaie, B., Sonkusale, S. R. & Khademhosseini, A., Aug 16 2018, In : Small. 14, 33, 1703509.

Research output: Contribution to journalArticle

pH sensors
Temperature sensors
Bandages
Microcontrollers
Drug delivery
3 Citations (Scopus)

Stochastic modeling and analysis of spindle power during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. K. & Guo, Y., Nov 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 11, 111011.

Research output: Contribution to journalArticle

Wear of materials
Sustainable development
Machining
Monitoring
Analysis of variance (ANOVA)
1 Citation (Scopus)

The effect of poly (glycerol sebacate) incorporation within hybrid chitin-lignin sol-gel nanofibrous scaffolds

Abudula, T., Gzara, L., Simonetti, G., Alshahrie, A., Salah, N., Morganti, P., Chianese, A., Fallahi, A., Tamayol, A., Bencherif, S. A. & Memic, A., Mar 19 2018, In : Materials. 11, 3, 451.

Research output: Contribution to journalArticle

Chitin
Lignin
Glycerol
Scaffolds
Sol-gels
1 Citation (Scopus)
Railroad tracks
Stiffness
Rails
Fatigue of materials
Railroad transportation
5 Citations (Scopus)

The positive role of curcumin-loaded Salmon nanoliposomes on the culture of primary cortical neurons

Hasan, M., Latifi, S., Kahn, C. J. F., Tamayol, A., Habibey, R., Passeri, E., Linder, M. & Arab-Tehrany, E., Jul 2018, In : Marine Drugs. 16, 7, 218.

Research output: Contribution to journalArticle

Curcumin
Salmon
Neurons
Solubility
Biological Availability

TRAUMATIC INJURY of ASTROCYTES: AN in VITRO STUDY

Hua, Y., Wilson, C. L., Lin, S., Dutta, DI., Kidambi, S. S. & Gu, L., Jun 1 2018, In : Journal of Mechanics in Medicine and Biology. 18, 4, 1850040.

Research output: Contribution to journalArticle

Membranes
Bioelectric potentials
Compressed air
Tissue engineering
Imaging systems
3 Citations (Scopus)

Ultrasonic backscatter from elongated grains using line focused ultrasound

Kube, C. M., Arguelles, A. P. & Turner, J. A., Jan 2018, In : Ultrasonics. 82, p. 79-83 5 p.

Research output: Contribution to journalArticle

Transducers
Ultrasonics
transducers
ultrasonics
elongation
2 Citations (Scopus)
Computer Simulation
Mental Competency
Pressure
Golf
Ureter
1 Citation (Scopus)

Virtual Reality Training System for Anytime/Anywhere Acquisition of Surgical Skills: A Pilot Study

Zahiri, M., Booton, R., Nelson, C. A., Oleynikov, D. & Siu, J. K-C., Mar 1 2018, In : Military medicine. 183, p. 86-91 6 p.

Research output: Contribution to journalArticle

Software
Physicians

各向异性脆性材料动态断裂的实验研究

Translated title of the contribution: Experimental study of the dynamic fracture behaviors of anisotropic brittle materialsGao, G., Li, Z. & Negahban, M., Oct 15 2018, In : Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering. 37, p. 3979-3989 11 p.

Research output: Contribution to journalArticle

fracture toughness
Brittleness
Fracture toughness
experimental study
crack propagation
2017
1 Citation (Scopus)

3D Printed Anchoring Sutures for Permanent Shaping of Tissues

Wei, W., Li, Y., Yang, H., Nassab, R., Shahriyari, F., Akpek, A., Guan, X., Liu, Y., Taranejoo, S., Tamayol, A., Zhang, Y. S., Khademhosseini, A. & Jang, H. L., Dec 2017, In : Macromolecular Bioscience. 17, 12, 1700304.

Research output: Contribution to journalArticle

Sutures
Tissue
Suture Anchors
Anchors
Strength of materials
1 Citation (Scopus)
Capsules
Lenses
Mechanics
Surgery
Numerical models
2 Citations (Scopus)

Active stiffening of F-actin network dominated by structural transition of actin filaments into bundles

Lin, S., Han, X., Tsui, G. C. P., Hui, D. & Gu, L., May 1 2017, In : Composites Part B: Engineering. 116, p. 377-381 5 p.

Research output: Contribution to journalArticle

Stretching
Actins
Elasticity
Fibers
16 Citations (Scopus)

AFM Identification of Beetle Exocuticle: Bouligand Structure and Nanofiber Anisotropic Elastic Properties

Yang, R., Zaheri, A., Gao, W., Hayashi, C. & Espinosa, H. D., Feb 10 2017, In : Advanced Functional Materials. 27, 6, 1603993.

Research output: Contribution to journalArticle

beetles
Nanofibers
elastic properties
atomic force microscopy
fibers
39 Citations (Scopus)

A highly adhesive and naturally derived sealant

Assmann, A., Vegh, A., Ghasemi-Rad, M., Bagherifard, S., Cheng, G., Sani, E. S., Ruiz-Esparza, G. U., Noshadi, I., Lassaletta, A. D., Gangadharan, S., Tamayol, A., Khademhosseini, A. & Annabi, N., Sep 2017, In : Biomaterials. 140, p. 115-127 13 p.

Research output: Contribution to journalArticle

Sealants
Gelatin
Adhesives
Glues
Ethylene Glycol

A method for measuring the attachment strength of the cestode Hymenolepis diminuta to the rat intestine

Xie, W., Racz, G. R., Terry, B. S. & Gardner, S. L., Nov 1 2017, In : Journal of Helminthology. 91, 6, p. 762-766 5 p.

Research output: Contribution to journalArticle

Hymenolepis diminuta
Cestoda
strength (mechanics)
Intestines
Parasites
2 Citations (Scopus)

Assessment of neuroprotective properties of Rhus coriaria L. ethanol extract in an in vitro model of retinal degeneration

Khalilpour, S., Behnammanesh, G., Abdul Majid, A. M. S., Tamayol, A. & Abdul Majid, A. S., Dec 2017, In : Journal of Herbal Medicine. 10, p. 45-52 8 p.

Research output: Contribution to journalArticle

Rhus
Retinal Degeneration
Ethanol
Caspases
Glutathione Transferase
22 Citations (Scopus)

Asymmetric Hysteresis Modeling and Compensation Approach for Nanomanipulation System Motion Control Considering Working-Range Effect

Sun, Z., Song, B., Xi, N., Yang, R., Hao, L., Yang, Y. & Chen, L., Jul 2017, In : IEEE Transactions on Industrial Electronics. 64, 7, p. 5513-5523 11 p., 7869292.

Research output: Contribution to journalArticle

Motion control
Hysteresis
Microscopes
Gain control
Imaging techniques
36 Citations (Scopus)

A Textile Dressing for Temporal and Dosage Controlled Drug Delivery

Mostafalu, P., Kiaee, G., Giatsidis, G., Khalilpour, A., Nabavinia, M., Dokmeci, M. R., Sonkusale, S., Orgill, D. P., Tamayol, A. & Khademhosseini, A., Nov 3 2017, In : Advanced Functional Materials. 27, 41, 1702399.

Research output: Contribution to journalArticle

Controlled drug delivery
textiles
delivery
Textiles
drugs
2 Citations (Scopus)
Atomic Force Microscopy
Validation Studies
Polyacrylates
Indentation
Atomic force microscopy
2 Citations (Scopus)

Benchmark Burnishing with Almen Strip for Surface Integrity

Liu, Z. Y., Fu, C. H., Sealy, M. P., Zhao, Y. & Guo, Y. B., Jan 1 2017, In : Procedia Manufacturing. 10, p. 456-466 11 p.

Research output: Contribution to journalArticle

Burnishing
Residual stresses
Compressive stress
Shot peening
Corrosion resistance
20 Citations (Scopus)

Biodegradable elastic nanofibrous platforms with integrated flexible heaters for on-demand drug delivery

Tamayol, A., Hassani Najafabadi, A., Mostafalu, P., Yetisen, A. K., Commotto, M., Aldhahri, M., Abdel-Wahab, M. S., Najafabadi, Z. I., Latifi, S., Akbari, M., Annabi, N., Yun, S. H., Memic, A., Dokmeci, M. R. & Khademhosseini, A., Dec 1 2017, In : Scientific reports. 7, 1, 4749.

Research output: Contribution to journalArticle

Anti-Bacterial Agents
Pharmaceutical Preparations
Wounds and Injuries
Regenerative Medicine
Bandages
67 Citations (Scopus)

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue

Byambaa, B., Annabi, N., Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh-Narbat, M., Shin, S. R., Tamayol, A. & Khademhosseini, A., Aug 23 2017, In : Advanced Healthcare Materials. 6, 16, 1700015.

Research output: Contribution to journalArticle

Hydrogel
Hydrogels
Bone
Tissue
Blood Vessels