Mechanical & Materials Engineering

Research Output 1977 2020

Filter
Conference contribution
2012

Role of opening in the mechanics of shockwave propagation under blast loading conditions

Gu, L., Akula, P. & Ganpule, S., Dec 1 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 657-658 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brain
Mechanics
Shear stress
Dynamic analysis

Self-Adaptive underactuated hybrid rolling/walking locomotion

Nelson, C. A., Dec 1 2012, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 951-956 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Locomotion
Robotics
Output
Gears
Clearance
4 Citations (Scopus)

Service life testing of components with defects in the rolling contact fatigue zone

Tarawneh, C., Koester, L. W., Fuller, A. J., Wilson, B. M. & Turner, J. A., Jan 1 2012, Bearing Steel Technologies, 9th Volume: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. ASTM International, p. 67-83 17 p. (ASTM Special Technical Publication; vol. 1548 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Service life
Steel
Fatigue of materials
Surface defects

Standard testing methods for mobile bearing knees

Walker, P. S. & Haider, H., Jan 1 2012, Mobile Bearing Total Knee Replacement Devices. ASTM International, p. 1-12 12 p. (ASTM Special Technical Publication; vol. 1531 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Testing
Wear of materials
Arthroplasty
Failure modes
4 Citations (Scopus)

Thermal assessment of convective heat transfer in air-cooled PEMFC stacks: An experimental study

Akbari, M., Tamayol, A. & Bahrami, M., Jan 1 2012, WHEC 2012 Conference Proceedings - 19th World Hydrogen Energy Conference. Elsevier Ltd, p. 1-11 11 p. (Energy Procedia; vol. 29).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Pressure drop
Heat transfer
Reynolds number

Transcranial threshold of inertial cavitation induced by diagnostic ultrasound and microbubbles

Liu, J., Gao, S., Porter, T. R., Everbach, C., Shi, W., Vignon, F., Powers, J., Lof, J., Turner, J. A. & Xie, F., Dec 1 2012, 11th International Symposium on Therapeutic Ultrasound. p. 221-226 6 p. (AIP Conference Proceedings; vol. 1481).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cavitation flow
bones
thresholds
pulses
swine

Wear of mobile bearing knees: Is it necessarily less?

Haider, H. & Kaddick, C., Jan 1 2012, Mobile Bearing Total Knee Replacement Devices. ASTM International, p. 218-231 14 p. (ASTM Special Technical Publication; vol. 1531 STP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Knee prostheses
Wear of materials
Force control
Testing
3 Citations (Scopus)

White layer thickness formation in electro discharge machining of Beryllium-Copper alloys

Yildiz, Y., Sundaram, M. M. & Rajurkar, K. P., Nov 28 2012, 40th North American Manufacturing Research Conference 2012 - Transactions of the North American Manufacturing Research Institution of SME. p. 663-670 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Beryllium alloys
Electric discharge machining
Copper alloys
Beryllium
Difference equations
2011
1 Citation (Scopus)

Articulated mechanism design and kinematics for natural orifice translumenal endoscopic surgery robot

Chin, W. J., Nelson, C. A. & Seow, C. M., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 459-467 9 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orifices
Surgery
Kinematics
Robots
Endoscopy
2 Citations (Scopus)

Assessment of thermal performance of electronic enclosures with rectangular fins: A passive thermal solution

Tamayol, A., McGregor, F., Demian, E., Trandafir, E., Bowler, P., Rada, P. & Bahrami, M., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 269-276 8 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fins (heat exchange)
Enclosures
Heat radiation
Heat transfer
Natural convection

Computational modeling of post-sutured tissue performance

Kasavajhala, A. R. M. & Gu, L., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 567-568 2 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tissue
Stiffness
Grafts
Finite element method
Defects
1 Citation (Scopus)

Concurrent type and dimensional synthesis of planar mechanisms using graph-theoretic enumeration, automatic loop closure equation generation, and descent-based optimization

Nelson, C. A., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. p. 215-222 8 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 7, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constrained optimization
Topology
10 Citations (Scopus)

Design of a four-DOF Modular Self-Reconfigurable Robot with novel gaits

Chu, K. D., Hossain, S. G. M. & Nelson, C. A., Dec 1 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 747-754 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gait
Robot
Robots
Module
Modular robots
1 Citation (Scopus)

Development and testing of nano robot end effector for cell electrophysiology and elastography studies

Lai, K. W. C., Gaitas, A., Xi, N., Yang, R. & Fung, C. K. M., Dec 1 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 1066-1069 4 p. 6144645. (Proceedings of the IEEE Conference on Nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

electrophysiology
end effectors
Electrophysiology
End effectors
robots

Distraction affects the robot-assisted surgical performance depending on task difficulty

Park, S. H., Chien, J. H., Oleynikov, D., Suh, I. & Siu, J. K-C., Dec 1 2011, Ergonomics for All: Celebrating PPCOE's 20 Years of Excellence - Selected Papers of the Pan-Pacific Conference on Ergonomics, PPCOE 2010. p. 615-619 5 p. (Ergonomics for All: Celebrating PPCOE's 20 Years of Excellence - Selected Papers of the Pan-Pacific Conference on Ergonomics, PPCOE 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

robot
Needles
Robots
Analysis of variance (ANOVA)
Time measurement

Drive level dependence of doubly rotated langasite resonators with different configurations

Zhang, H., Xie, Y., Turner, J. A. & Kosinski, J. A., Nov 7 2011, 2011 Joint Conference of the IEEE International Frequency Control Symposium and European Frequency and Time Forum, IFCS/EFTF 2011 - Proceedings. 5977290. (Proceedings of the IEEE International Frequency Control Symposium and Exposition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Resonators
Crystal filters
Crystal resonators
Piezoelectric materials
Acoustics
6 Citations (Scopus)

Electromyographic correlates of learning during robotic surgical training in virtual reality

Suh, I. H., Mukherjee, M., Schrack, R., Park, S. H., Chien, J. H., Oleynikov, D. & Siu, J. K-C., Jan 1 2011, Medicine Meets Virtual Reality 18: NextMed, MMVR18. IOS Press, p. 630-634 5 p. (Studies in Health Technology and Informatics; vol. 163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Virtual reality
Muscle
Learning
Muscles
6 Citations (Scopus)

Energy harvesting from vertical deflection of railroad track using a hydraulic system for improving railroad track safety

Nelson, C. A., Pourghodrat, A. & Fateh, M., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 259-266 8 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad tracks
Energy harvesting
Hydraulics
Railroad transportation
Railroad crossings
2 Citations (Scopus)

Fracture toughness characterization of nanoreinforced carbon-fiber composite materials for damage mitigation

Van Der Vennet, J. A., Duenas, T., Dzenis, Y., Peterson, C. T., Bakis, C. E., Carter, D. & Roberts, J. K., Jun 6 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. 797823. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7978).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofibers
Fracture Toughness
Carbon Fiber
fiber composites
carbon fibers

Improved PID control using an adaptive two-input single-output coarse/fine approach

Wood, E., Nelson, C. A. & Koch, A., Dec 1 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 1149-1158 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

PID Control
Three term control systems
Robotics
Output
Velocity control
4 Citations (Scopus)

Improving an energy harvesting device for railroad safety applications

Pourghodrat, A., Nelson, C. A., Phillips, K. J. & Fateh, M., Jun 13 2011, Active and Passive Smart Structures and Integrated Systems 2011. 79770U. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7977).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

rail transportation
Railroad tracks
Energy Harvesting
Energy harvesting
Railroads
2 Citations (Scopus)

Incorporating biomechanical research topics into K-12 classroom design projects to broaden participation and increase engineering interest

Briggs, B. N., Terry, B. S., Yowell, J. & Rivale, S., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 333-341 9 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Curricula
Students
Biopsy
Physiology
Pathology
3 Citations (Scopus)

Information quality on the World Wide Web: A framework to measure and its validation

Kandari, J. S., Jones, E. C., Nah, F. F. & Bishu, R. R., Jan 1 2011, IMCIC 2011 - 2nd International Multi-Conference on Complexity, Informatics and Cybernetics, Proceedings. Chu, H-W., Callaos, N. C., Zinn, C. D., Lesso, W., Welsch, F. & Savoie, M. J. (eds.). International Institute of Informatics and Systemics, IIIS, p. 204-209 6 p. (IMCIC 2011 - 2nd International Multi-Conference on Complexity, Informatics and Cybernetics, Proceedings; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

World Wide Web
Websites

Interactions between blast waves and V-shaped and cone-shaped structures

Peng, W., Zhang, Z. Y., Gogos, G. & Gazonas, G., Nov 8 2011, Recent Progresses in Fluid Dynamics Research - Proceedings of the Sixth International Conference on Fluid Mechanics, ICFM VI. p. 149-153 5 p. (AIP Conference Proceedings; vol. 1376).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

blasts
cones
wave reflection
stems
interactions

Investigation and characterization of graphene for optical sensing

Lai, K. W. C., Xi, N., Fung, C. K. M., Chen, H., Chen, L., Yang, R. & Song, B., Dec 1 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 1124-1127 4 p. 6144583. (Proceedings of the IEEE Conference on Nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite
Graphene
graphene
Infrared radiation
photon-electron interaction

Investigations of bio marker for stem cell differentiations using an Atomic Force Microscopy based nanorobot

Yang, R., Xi, N., Qu, C., Fung, C. K. M., Tan, M. & Sun, Y., Dec 1 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 703-706 4 p. 6144582. (Proceedings of the IEEE Conference on Nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanorobots
stem cells
Stem cells
markers
Atomic force microscopy

Miniature in vivo cameras for use in single-incision robotic surgery

Otten, N. D., Farritor, S. M., Lehman, A. C., Wortman, T. D., McCormick, R. L., Markvicka, E. & Oleynikov, D., Jul 11 2011, 48th Annual Rocky Mountain Bioengineering Symposium and 48th International ISA Biomedical Sciences Instrumentation Symposium 2011. p. 154-159 6 p. (48th Annual Rocky Mountain Bioengineering Symposium and 48th International ISA Biomedical Sciences Instrumentation Symposium 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Visualization
Cameras
Laparoscopy
Robots

Modeling heat transfer during cooling of cooked ready-to-eat meats using three-dimensional finite element analysis

Cepeda, J. F., Weiler, C. L., Negahban, M., Thippareddi, H. & Subbiah, J., Jan 1 2011, American Society of Agricultural and Biological Engineers Annual International Meeting 2011, ASABE 2011. American Society of Agricultural and Biological Engineers, p. 3436-3456 21 p. (American Society of Agricultural and Biological Engineers Annual International Meeting 2011, ASABE 2011; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

finite element analysis
heat transfer
cooling
meat
heat treatment
3 Citations (Scopus)

Modeling surgical skill learning with cognitive simulation

Park, S. H., Suh, I. H., Chien, J. H., Paik, J., Ritter, F. E., Oleynikov, D. & Siu, J. K-C., Jan 1 2011, Medicine Meets Virtual Reality 18: NextMed, MMVR18. IOS Press, p. 428-432 5 p. (Studies in Health Technology and Informatics; vol. 163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Learning
Needles
Motor Skills
Data storage equipment
Sutures

MRI-based three dimensional modeling of stenting procedure

Zhao, S., Gu, L. & Ganpule, S., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 569-570 2 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stents
Magnetic resonance imaging
Boning
Blood
Geometry
1 Citation (Scopus)

Multi-functional surgical robot for Laparo-Endoscopic Single-Site colectomies

Wortman, T. D., McCormick, R. L., Markvicka, E. J., Frederick, T. P., Farritor, S. M. & Oleynikov, D., Dec 1 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 653-658 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Robot
Robots
Operating rooms
Workspace
4 Citations (Scopus)

Multifunction robotic platform for natural orifice surgery

Zhang, X., Chin, W. J., Seow, C. M., Nakamura, A., Head, M., Farritor, S. M., Oleynikov, D. & Nelson, C. A., Jan 1 2011, Medicine Meets Virtual Reality 18: NextMed, MMVR18. IOS Press, p. 740-742 3 p. (Studies in Health Technology and Informatics; vol. 163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Orifices
Surgery
End effectors
Research Design
1 Citation (Scopus)

RETRACTED ARTICLE: Finite element analysis of stent deployment in a stenotic artery and their interactions

Zhao, S., Gu, L., Froemming, S. R., Hammel, J. M. & Lang, H., Jan 1 2011, 5th International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2011. IEEE Computer Society, 5780291. (5th International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite Element Analysis
Stents
Arteries
Finite element method
Struts
3 Citations (Scopus)

Robot kinematic design studies for natural orifice surgery

Seow, C. M., Chin, W. J. & Nelson, C. A., Dec 1 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 605-613 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 6, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orifices
Surgery
Manipulators
Kinematics
Robotic Manipulator
6 Citations (Scopus)

Self-reconfiguration in modular robots using coalition games with uncertainty

Ramaekers, Z., Dasgupta, P., Ufimtsev, V., Hossain, S. G. M. & Nelson, C., Nov 2 2011, Automated Action Planning for Autonomous Mobile Robots - Papers from the 2011 AAAI Workshop, Technical Report. p. 57-63 7 p. (AAAI Workshop - Technical Report; vol. WS-11-09).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modular robots
Robots
Uncertainty
Planning
4 Citations (Scopus)

Simulation and control system of a power harvesting device for railroad track health monitoring

Phillips, K. J., Nelson, C. A. & Fateh, M., May 24 2011, Health Monitoring of Structural and Biological Systems 2011. 79840D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7984).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Power Harvesting
rail transportation
Railroad tracks
systems simulation
Health Monitoring
3 Citations (Scopus)

Stereo image-based arm tracking for in vivo surgical robotics

Psota, E., Strabala, K., Dumpert, J., Perez, L. C., Farritor, S. M. & Oleynikov, D., Jan 1 2011, Medicine Meets Virtual Reality 18: NextMed, MMVR18. IOS Press, p. 454-460 7 p. (Studies in Health Technology and Informatics; vol. 163).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robotics
Minimally Invasive Surgical Procedures
Automation
Medical applications
Surgery

Stereoscopic visualization and haptic technology used to create a virtual environment for remote surgery

Bornhoft, J. M., Strabala, K. W., Wortman, T. D., Lehman, A. C., Oleynikov, D. & Farritor, S. M., Jul 11 2011, 48th Annual Rocky Mountain Bioengineering Symposium and 48th International ISA Biomedical Sciences Instrumentation Symposium 2011. p. 65-70 6 p. (48th Annual Rocky Mountain Bioengineering Symposium and 48th International ISA Biomedical Sciences Instrumentation Symposium 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Virtual reality
Depth perception
Visualization
Feedback

Study of coated microtools in electrochemical machining (ECM)

Swain, A. K., Sundaram, M. M. & Rajurkar, K. P., Nov 9 2011, 39th North American Manufacturing Research Conference 2011 - Transactions of the North American Manufacturing Research Institution of SME. p. 358-368 11 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 39).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Tungsten
Nickel
Micromachining
Electrodeposition
1 Citation (Scopus)

Through-plane gas permeability of proton exchange membrane fuel cell gas diffusion layers

Tamayol, A., Mcgregor, F. & Bahrami, M., Dec 1 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 591-600 10 p. (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas permeability
Diffusion in gases
Proton exchange membrane fuel cells (PEMFC)
Polytetrafluoroethylenes
Pressure drop
2 Citations (Scopus)

Uncooled infrared sensing using graphene

Lai, K. W. C., Xi, N., Fung, C. K. M., Chen, H., Chen, L., Yang, R. & Song, B., Dec 1 2011, 2011 IEEE Nanotechnology Materials and Devices Conference, NMDC 2011. p. 98-101 4 p. 6155320. (2011 IEEE Nanotechnology Materials and Devices Conference, NMDC 2011).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite
Graphene
Infrared radiation
Multilayers
Photocurrents
2 Citations (Scopus)

Video rate atomic force microscopic imaging

Song, B., Xi, N., Yang, R., Lai, K. W. C. & Qu, C., Dec 1 2011, 3rd Int. Joint Topical Meeting on Emerg. Preparedness and Response and Robotics and Remote Syst. 2011, EPRRSD, 13th Robotics and Remote Syst. for Hazardous Environ. and 11th Emerg. Prep. and Response. p. 717-727 11 p. (3rd Int. Joint Topical Meeting on Emergency Preparedness and Response and Robotics and Remote Systems 2011, EPRRSD, and 13th Robotics and Remote Systems for Hazardous Environments).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomic force microscopy
Imaging techniques
Imaging systems
Biochemistry
Image reconstruction
19 Citations (Scopus)

Video rate Atomic Force Microscopy (AFM) imaging using compressive sensing

Song, B., Xi, N., Yang, R., Lai, K. W. C. & Qu, C., Dec 1 2011, 2011 11th IEEE International Conference on Nanotechnology, NANO 2011. p. 1056-1059 4 p. 6144587. (Proceedings of the IEEE Conference on Nanotechnology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomic force microscopy
atomic force microscopy
Imaging techniques
Topography
topography
6 Citations (Scopus)

Work in progress: Gender impacts of relevant robotics curricula on high school students' engineering attitudes and interest

Terry, B. S., Briggs, B. N. & Rivale, S., Dec 1 2011, 41st Annual Frontiers in Education Conference: Celebrating 41 Years of Monumental Innovations from Around the World, FIE 2011. 6143090. (Proceedings - Frontiers in Education Conference, FIE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Curricula
Robotics
Students
engineering
curriculum
2010

Atomic force microscopy based nanorobotic operations for biomedical investigations

Xi, N., Yang, R., Fung, C. K. M., Lai, K. W. C., Song, B. & Qu, C., Dec 1 2010, 2010 10th IEEE Conference on Nanotechnology, NANO 2010. p. 121-126 6 p. 5698058. (2010 10th IEEE Conference on Nanotechnology, NANO 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

atomic force microscopy
dissection
cells
robot arms
pushing
1 Citation (Scopus)

Case studies determining the effects of track stiffness on vehicle dynamics

Lu, S., Duan, H., Greisen, C., Farritor, S., Arnold, R., Hogan, C., Dick, M., Fateh, M. & Carr, G., Nov 5 2010, Proceedings of the ASME Joint Rail Conference 2010, JRC2010. p. 145-154 10 p. (Proceedings of the ASME Joint Rail Conference 2010, JRC2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad tracks
Stiffness
simulation
mathematics
Wheels
1 Citation (Scopus)

Cellular tensegrity modeling with Atomic Force Microscopy (AFM) experimentation

Yang, R., Xi, N., Fung, C. K. M., Seiffert-Sinha, K., Lai, K. W. C., Song, B. & Sinha, A. A., Dec 1 2010, 2010 IEEE Nanotechnology Materials and Devices Conference, NMDC2010. p. 65-70 6 p. 5652145. (2010 IEEE Nanotechnology Materials and Devices Conference, NMDC2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Atomic force microscopy
Adhesion
Mechanics
Stiffness
Mechanical properties

Characterization and modification of surface topography by sequential laser peening biodegradable magnesium-calcium alloy

Sealy, M. P., Guo, A. & Guo, Y. B., Dec 1 2010, ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010. p. 99-100 2 p. (ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcium alloys
Shot peening
Surface topography
Magnesium alloys
Lasers
3 Citations (Scopus)

Comparative studies of Atomic Force Microscopy (AFM) and Quartz Crystal Microbalance with Dissipation (QCM-D) for real-time identification of signaling pathway

Yang, R., Xi, N., Fung, C. K. M., Qu, C. & Xi, J., Dec 1 2010, 2010 10th IEEE Conference on Nanotechnology, NANO 2010. p. 1016-1020 5 p. 5697857. (2010 10th IEEE Conference on Nanotechnology, NANO 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

quartz crystals
microbalances
dissipation
atomic force microscopy
cells

Computational simulation of the deformation of neuronal cells

Cao, G., Zhou, Y., Lee, J. S., Lim, J. Y., Ganpule, S. & Chandra, N., Dec 1 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. p. 179-180 2 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Neurons
Finite element method
Geometry
Confocal microscopy
Computer simulation