Mechanical & Materials Engineering

Research Output 1983 2019

Filter
Conference contribution
2019

Comparison of self-organized micro/nanostructure formation on copper using dual-pulse versus single-pulse femtosecond laser surface processing

Zuhlke, C. A., Roth, N., Ediger, A., Tsubaki, A., Peng, E., Anderson, M., Kruse, C., Shield, J., Gogos, G. & Alexander, D. R., Jan 1 2019, Laser-Based Micro- and Nanoprocessing XIII. Klotzbach, U., Watanabe, A. & Kling, R. (eds.). SPIE, 109060Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10906).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Femtosecond Laser Pulses
Ultrashort pulses
Nanostructures
Copper
Laser pulses

Deep learning segmentation of coronary calcified plaque from intravascular optical coherence tomography (IVOCT) images with application to finite element modeling of stent deployment

Gharaibeh, Y., Dong, P., Prabhu, D., Kolluru, C., Lee, J., Zimin, V., Mozafari, H., Bizzera, H., Gu, L. & Wilson, D., Jan 1 2019, Medical Imaging 2019: Image-Guided Procedures, Robotic Interventions, and Modeling. Fei, B. & Linte, C. A. (eds.). SPIE, 109511C. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10951).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stents
Optical tomography
Optical Coherence Tomography
calcification
lumens

Development of an in vitro traumatic brain injury model using 3d cultured neural stem cells and 3d printed device

Shi, W., Kuss, M. A., Dong, P., Gu, L., Kim, H. J. & Duan, B., Jan 1 2019, Society for Biomaterials Annual Meeting and Exposition 2019: The Pinnacle of Biomaterials Innovation and Excellence - Transactions of the 42nd Annual Meeting. Society for Biomaterials, 1 p. (Transactions of the Annual Meeting of the Society for Biomaterials and the Annual International Biomaterials Symposium; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brain models
Neural Stem Cells
Stem cells
Brain
Equipment and Supplies
2018

A Bistable Underactuated Finger with Reconfigurable Grasping Modes

Nelson, C. A., Aug 28 2018, 2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings. Herder, J. L. & van der Wijk, V. (eds.). Institute of Electrical and Electronics Engineers Inc., 8449860. (2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grasping
Bistability
Prototyping
Simulation Analysis
Reconfiguration

A positively-engaged infinitely variable transmission using split helical gears

Brush, E. R. & Nelson, C. A., Jan 1 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), Vol. 5B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Helical gears
Hybrid Electric Vehicle
Electric Vehicle
Hybrid vehicles
Angular velocity
1 Citation (Scopus)

A review of additive manufacturing of magnesium alloys

Jahangir, M. N., Mamun, M. A. H. & Sealy, M. P., Jul 13 2018, International Conference on Mechanical Engineering: Proceedings of the 12th International Conference on Mechanical Engineering, ICME 2017. Al Nur, M., Ali, M. & Ahmed, S. R. (eds.). American Institute of Physics Inc., 030026. (AIP Conference Proceedings; vol. 1980).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

magnesium alloys
manufacturing
orthopedics
sectors
magnesium

Characterization and modeling of PEEK in histories with reverse loading

Li, W., Gazonas, G., Brown, E. N., Rae, P. J. & Negahban, M., 2018, Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 2. p. 65-69 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyether ether ketones
Correlation methods
Plastic flow
Strain rate
Anisotropy

Degradation modeling of bioabsorbable polymer stent

Dong, P., Wang, L. & Gu, L., Jan 1 2018, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stents
Degradation
Polymers
Lactic acid
Elastic moduli

Improved design of a gait rehabilitation robot

Stolle, C. J., Nelson, C. A., Burnfield, J. & Buster, T. W., 2018, New Trends in Medical and Service Robots - Design, Analysis and Control. Springer Netherlands, Vol. 48. p. 31-44 14 p. (Mechanisms and Machine Science; vol. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Pediatrics
Robots
Sprockets
Speed control

Modeling and testing a family of surgical robots: An experience report

Mansoor, N., Saddler, J. A., Silva, B., Bagheri, H., Cohen, M. B. & Farritor, S. M., Oct 26 2018, ESEC/FSE 2018 - Proceedings of the 2018 26th ACM Joint Meeting on European So ftware Engineering Conference and Symposium on the Foundations of So ftware Engineering. Garci, A., Pasareanu, C. S. & Leavens, G. T. (eds.). Association for Computing Machinery, Inc, p. 785-790 6 p. (ESEC/FSE 2018 - Proceedings of the 2018 26th ACM Joint Meeting on European Software Engineering Conference and Symposium on the Foundations of Software Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Testing
Pipelines
Robotic surgery
Robots
Hardware
1 Citation (Scopus)

On improving stiffness of cable robots

Nelson, C. A., 2018, Cable-Driven Parallel Robots - Proceedings of the 3rd International Conference on Cable-Driven Parallel Robots. Springer Netherlands, Vol. 53. p. 331-339 9 p. (Mechanisms and Machine Science; vol. 53).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cables
Stiffness
Robots
Manipulators
Kinematics

Optimization of a redundant serial spherical mechanism for robotic minimally invasive surgery

Nelson, C. A., Laribi, M. A. & Zeghloul, S., 2018, Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics, 2017. Springer Netherlands, Vol. 50. p. 126-134 9 p. (Mechanisms and Machine Science; vol. 50).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Robotics
Multiobjective optimization
Kinematics
Robots

Prototyping and validation of a fixed-actuator 3-leg 6-DOF robot

Jensen, N. A. & Nelson, C. A., Jan 1 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), Vol. 5B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parallel Robot
Workspace
Prototyping
Actuator
Actuators
1 Citation (Scopus)

Static analysis and dimensional optimization of a cable-driven parallel robot

Newman, M., Zygielbaum, A. & Terry, B. S., 2018, Cable-Driven Parallel Robots - Proceedings of the 3rd International Conference on Cable-Driven Parallel Robots. Springer Netherlands, Vol. 53. p. 152-166 15 p. (Mechanisms and Machine Science; vol. 53).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Static analysis
Cables
Robots
End effectors
Stiffness
1 Citation (Scopus)

Stochastic modeling and analysis of spindle energy consumption during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. & Guo, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy utilization
Wear of materials
Monitoring
Analysis of variance (ANOVA)
Sustainable development

The effect of a spanwise body force on skin-friction reduction and its connections to low-drag states in turbulent flow

Hafner, T. A. & Park, J. S., Jan 1 2018, Fluids Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Skin friction
Turbulent flow
Drag
Drag reduction
Shear stress

The influence of primary blast wave on the posterior part of the eyeball

Tong, J. & Gu, L., Jan 1 2018, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optics
Cerebrospinal fluid
Tissue
Experiments
1 Citation (Scopus)

Unmanned Aerial Auger for Underground Sensor Installation

Sun, Y., Plowcha, A., Nail, M., Elbaum, S., Terry, B. S. & Detweiler, C., Dec 27 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 1374-1381 8 p. 8593824. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Antennas
Sensors
Soils
Electric power utilization
2017

Accelerated electrochemical machining tool design via multiphysics modeling

Skinn, B., Hall, T. D., Snyder, S., Rajurkar, K. P. & Taylor, E. J., Jan 1 2017, Selected Proceedings from the 231st ECS Meeting New Orleans, LA - Spring 2017. 11 ed. Electrochemical Society Inc., p. 963-979 17 p. (ECS Transactions; vol. 77, no. 11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Indentation
Dissolution
Electric fields
Polarization
1 Citation (Scopus)

Adaptive locomotion learning in modular self-reconfigurable robots: A game theoretic approach

Dutta, A., Dasgupta, P. & Nelson, C. A., Dec 13 2017, IROS 2017 - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-September. p. 3556-3561 6 p. 8206200

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Reinforcement learning
Robotics
2 Citations (Scopus)

A fixed-actuator configuration for 3-LEG 6-DOF robots

Nelson, C. A., Jan 1 2017, 41st Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parallel Robot
Actuator
Actuators
Robot
Robots

A pan/tilt surgical camera with parallel structure and elastic platform

Shen, T., Nelson, C. A. & Oleynikov, D., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
1 Citation (Scopus)

Back stress in modeling the response of PEEK and PC

Li, W., Gazonas, G., Brown, E. N., Rae, P. J. & Negahban, M., 2017, Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 2. p. 181-186 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyether ether ketones
Dynamic response
Plastic deformation
Polymers
Experiments

Design of an adjustable table mount for multifunctional NOTES robot

Fischer, S., Shen, T., Nelson, C. A. & Oleynikov, D., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
1 Citation (Scopus)

Frequency domain approach for dynamics identification of the actuator with asymmetric hysteresis

Sun, Z., Cheng, Y., Xi, N., Bi, S., Li, C., Song, B., Yang, R., Hao, L. & Chen, L., Aug 21 2017, 2017 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 364-369 6 p. 8014044

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intelligent materials
Hysteresis
Identification (control systems)
Actuators
NEMS

Image-based modeling of optic nerve head mechanics following lumbar puncture

Tong, J., Ghate, D. A., Kedar, S. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optics
Mechanics

Numerical analysis of blood flow through discrete stenosis: Role of eccentricity and spacing ratio

Ju, S. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis
Blood

OCT-based three dimensional modeling of stent deployment

Dong, P., Prabhu, D., Wilson, D. L., Bezerra, H. G. & Gu, L., Jan 1 2017, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stents
Optical tomography
Calcium
Balloons
Planning

Pose-independent counterweighting of cable-suspended payloads with application to rehabilitation

Nelson, C. A., Thienpont, R. & Shinde, A., 2017, New Trends in Mechanism and Machine Science: Theory and Industrial Applications. Kluwer Academic Publishers, Vol. 43. p. 345-353 9 p. (Mechanisms and Machine Science; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Patient rehabilitation
Cables
Recovery

QFD approach to define CSR: Indian perspective

Babu, S., Krishnakumar, U. & Bishu, R. R., 2017, 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017. IEOM Society, p. 1654-1673 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sustainable development
Wood
Industry
Corporate Social Responsibility
Quality function deployment
1 Citation (Scopus)

Role of copper oxide layer on pool boiling performance with femtosecond laser processed surfaces

Kruse, C., Peng, E., Zuhlke, C., Shield, J., Alexander, D. R., Ndao, S. & Gogos, G., Jan 1 2017, ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2017. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Femtosecond Laser
Copper oxides
Ultrashort pulses
Copper
Boiling liquids

Stability improvement of a four cable-driven parallel manipulator using a center of mass balance system

Salafian, I., Stewart, B., Newman, M., Zygielbaum, A. I. & Terry, B. S., 2017, Hyperspectral Imaging Sensors: Innovative Applications and Sensor Standards 2017. SPIE, Vol. 10213. 102130K

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parallel Manipulator
mass balance
Barycentre
Cable
end effectors

Structure, ferroelectric and mechanical performance of polycrystalline gadolinium-doped lead lanthanum zirconate titanate ceramics

Mansour, S. F., Eid, A. M., El-Latif, L. A., Rashad, M. M., Ducharme, S., Afifi, M. & Turner, J. A., Aug 1 2017, 2017 Joint IEEE International Symposium on Applications of Ferroelectrics, International Workshop on Acoustic Transduction Materials and Devices and Piezoresponse Force Microscopy Workshop, ISAF-IWATMD-PFM 2017 - Conference. Institute of Electrical and Electronics Engineers Inc., p. 63-67 5 p. 8000213

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lanthanum
Gadolinium
Ferroelectric materials
Lead
Doping (additives)

Target lesion calcium arc influence the performance of stenting

Dong, P., Lin, S., Wilson, D. L., Bezerra, H. G. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcium

Ureterovesical junction competence depends on ureteral orifice more than intravesical tunnel length

Tong, J., Villanueva, C. A., Nelson, C. A. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orifices
Tunnels
2016

A model to assess quality of disaster reliief efforts

Manoj, P. & Bishu, R. R., Jan 1 2016, 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016. IEOM Society, p. 3029-3030 2 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 8-10 March 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Disasters
Quality of service
Tsunamis
Earthquakes
Economics
2 Citations (Scopus)

Chapter 6: Nano to macro: Mechanical evaluation of macroscopically long individual nanofibers

Papkov, D., Maleckis, K., Zou, Y., Andalib, M., Goponenko, A. & Dzenis, Y., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 5. p. 35-43 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofibers
Macros
Network protocols
Nanostructured materials
Mechanical properties
2 Citations (Scopus)

Coordination of modular robots by means of topology discovery and leader election: Improvement of the locomotion case

Baca, J., Woosley, B., Dasgupta, P., Dutta, A. & Nelson, C. A., 2016, Springer Tracts in Advanced Robotics. Springer Verlag, Vol. 112. p. 447-458 12 p. (Springer Tracts in Advanced Robotics; vol. 112).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modular robots
Topology
Robots
Communication
Message passing
1 Citation (Scopus)

Effects of hand dominance and postural selection on muscle activities of virtual laparoscopic surgical training tasks

Huang, C. K., Boman, A., White, A., Oleynikov, D. & Siu, J. K-C., 2016, Studies in Health Technology and Informatics. IOS Press, Vol. 220. p. 142-145 4 p. (Studies in Health Technology and Informatics; vol. 220).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Hand
Muscles
Muscle Fatigue
Posture

Enumeration of configurations and their kinematics for ModRED II modular robots

Hossain, K. M., Nelson, C. A. & Dasgupta, P., 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), Vol. 5B-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modular robots
Enumeration
Kinematics
Robot
Robots
1 Citation (Scopus)

Human gaze commands classification: A shape based approach to interfacing with robots

Craig, T. L., Nelson, C. A., Li, S. & Zhang, X., Oct 7 2016, MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 7587154

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robot
Robots
Human-machine Interface
Eye Tracking
Humanoid Robot

Influence of intracranial pressure on the lamina Cribrosa

Tong, J., Hua, Y., Ghate, D. A., Kedar, S. & Gu, L., Jan 1 2016, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), 2602031. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure effects
2 Citations (Scopus)

Integration of automated camera steering for robotic single-site surgery

Zahiri, M., Nelson, C. A., Gonzalo Garay-Romero, R. & Oleynikov, D., 2016, Robotics and Mechatronics - Proceedings of the 4th IFToMM International Symposium on Robotics and Mechatronics. Kluwer Academic Publishers, Vol. 37. p. 153-160 8 p. (Mechanisms and Machine Science; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surgery
Robotics
Cameras
Visualization
Recovery

Investigating the influence of hand dominance on postural sway during traditional and simulated laparoscopic surgical skills practice

White, A., Huang, C. K., Oleynikov, D. & Siu, J. K-C., 2016, Studies in Health Technology and Informatics. IOS Press, Vol. 220. p. 450-453 4 p. (Studies in Health Technology and Informatics; vol. 220).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muscle
Hand
Muscles
Laparoscopy
Surgery
3 Citations (Scopus)

Mechanical characterization and preliminary modeling of PEEK

Li, W., Brown, E. N., Rae, P. J., Gazonas, G. & Negahban, M., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 7. p. 209-218 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyether ether ketones
Polymers
Mechanical stability
Plastic flow
Anisotropy
1 Citation (Scopus)

Modular robot task functionality driven by hybrid automata

Hossain, K. M., Nelson, C. A., Dasgupta, P. & Baca, J., Oct 7 2016, MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 7587174

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modular robots
Hybrid Automata
Robot
Module
Docking

Performance assessment of a noninvasive swallowable biosensor deployment system in microgravity

Slawinski, P. R., Lewis, W. M. & Terry, B. S., 2016, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3. 2602004

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microgravity
Biosensors
Endoscopy
Space flight
NASA

Real-time monitoring and prognosis of energy consumption in hard milling

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Dec 16 2016, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 422-427 6 p. 7790200. (International Symposium on Flexible Automation, ISFA 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
Energy utilization
Monitoring
Wear of materials
Energy efficiency
2 Citations (Scopus)

Steady heat conduction with generalized boundary conditions

Cole, K. D., De Monte, F., McMasters, R. L., Woodbury, K. A., Haji-Sheikh, A. & Beck, J. V., 2016, Education and Globalization. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat conduction
Boundary conditions
Numbering systems
Heat transfer
Students

Study of secondary pool boiling effects with functionalized surfaces created via Femtosecond Laser Surface Processing

Kruse, C., Tsubaki, A., Zuhlke, C., Anderson, T., Alexander, D. R., Gogos, G. & Ndao, S., Jul 20 2016, Proceedings of the 15th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2016. Institute of Electrical and Electronics Engineers Inc., p. 352-358 7 p. 7517570

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrashort pulses
Boiling liquids
Processing
Heat flux
Microstructure