Mechanical & Materials Engineering

Research Output

Does Gallbladder Ejection Fraction Predict Outcome after Cholecystectomy for Suspected Chronic Acalculous Gallbladder Dysfunction? A Systematic Review

DiBaise, J. K. & Oleynikov, D., Dec 2003, In : American Journal of Gastroenterology. 98, 12, p. 2605-2611 7 p.

Research output: Contribution to journalReview article

58 Scopus citations

Does illness severity matter? A comparison of laparoscopic esophagomyotomy with fundoplication and esophageal dilation for achalasia

Reynoso, J. F., Tiwari, M. M., Tsang, A. W. & Oleynikov, D., May 2011, In : Surgical endoscopy. 25, 5, p. 1466-1471 6 p.

Research output: Contribution to journalArticle

12 Scopus citations

Does type of mesh used have an impact on outcomes in laparoscopic inguinal hernia?

Shah, B. C., Goede, M. R., Bayer, R., Buettner, S. L., Putney, S. J., McBride, C. L. & Oleynikov, D., Dec 1 2009, In : American journal of surgery. 198, 6, p. 759-764 6 p.

Research output: Contribution to journalArticle

15 Scopus citations

Does Vitamin E-Stabilized Ultrahigh-Molecular-Weight Polyethylene Address Concerns of Cross-Linked Polyethylene in Total Knee Arthroplasty?

Haider, H., Weisenburger, J. N., Kurtz, S. M., Rimnac, C. M., Freedman, J., Schroeder, D. W. & Garvin, K. L., Mar 1 2012, In : Journal of Arthroplasty. 27, 3, p. 461-469 9 p.

Research output: Contribution to journalArticle

55 Scopus citations

Do you need a computed tomographic scan to evaluate suspected appendicitis in young men: An administrative database review

Shaligram, A., Pallati, P., Simorov, A., Meyer, A. & Oleynikov, D., Dec 1 2012, In : American journal of surgery. 204, 6, p. 1025-1030 6 p.

Research output: Contribution to journalArticle

7 Scopus citations

Drilling of noncircular blind micro holes by micro EDM

Yu, Z., Rajurkar, K. P. & Shen, H., Jan 1 2002, p. 1-8. 8 p.

Research output: Contribution to conferencePaper

Drive level dependence of doubly rotated langasite resonators with different configurations

Zhang, H., Xie, Y., Turner, J. A. & Kosinski, J. A., Nov 7 2011, 2011 Joint Conference of the IEEE International Frequency Control Symposium and European Frequency and Time Forum, IFCS/EFTF 2011 - Proceedings. 5977290. (Proceedings of the IEEE International Frequency Control Symposium and Exposition).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drive-level dependence of doubly rotated langasite resonators with different configurations

Zhang, H., Kosinski, J., Xie, Y. & Turner, J., May 20 2013, In : IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 60, 5, p. 963-969 7 p., 6512833.

Research output: Contribution to journalArticle

4 Scopus citations

Driver characteristics associated with knowledge of correct roundabout negotiation

McKnight, G. A., Khattak, A. J. & Bishu, R., Dec 1 2008, In : Transportation Research Record. 2078, p. 96-99 4 p.

Research output: Contribution to journalArticle

9 Scopus citations

Driving habits of the elderly. A survey

Bishu, R. R., Foster, B. & McCoy, P. T., Jan 1 1991, In : Proceedings of the Human Factors Society. 2, p. 1134-1138 5 p.

Research output: Contribution to journalConference article

3 Scopus citations

Droplet on a fiber: Geometrical shape and contact angle

Wu, X. F. & Dzenis, Y. A., Sep 1 2006, In : Acta Mechanica. 185, 3-4, p. 215-225 11 p.

Research output: Contribution to journalArticle

58 Scopus citations

Droplet vaporization in subcritical and supercritical environments; high vs low pressure modelling

Jia, H. & Gogos, G., Feb 1994, In : Acta Astronautica. 32, 2, p. 121-129 9 p.

Research output: Contribution to journalArticle

4 Scopus citations

Drug delivery systems and materials for wound healing applications

Saghazadeh, S., Rinoldi, C., Schot, M., Kashaf, S. S., Sharifi, F., Jalilian, E., Nuutila, K., Giatsidis, G., Mostafalu, P., Derakhshandeh, H., Yue, K., Swieszkowski, W., Memic, A., Tamayol, A. & Khademhosseini, A., Mar 1 2018, In : Advanced Drug Delivery Reviews. 127, p. 138-166 29 p.

Research output: Contribution to journalReview article

45 Scopus citations

Dynamic analysis of the ultrasonic machining process

Wang, Z. Y. & Rajurkar, K. P., Dec 1 1995, p. 87-97. 11 p.

Research output: Contribution to conferencePaper

2 Scopus citations

Dynamic analysis of the ultrasonic machining process

Wang, Z. Y. & Rajurkar, K. P., Aug 1 1996, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 118, 3, p. 376-381 6 p.

Research output: Contribution to journalArticle

27 Scopus citations

Dynamic bearing testing aimed at identifying the root cause of warm bearing temperature trending

Tarawneh, C. M., Wilson, B. M., Cole, K. D., Fuentes, A. A. & Cardenas, M., Sep 21 2009, In : American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD. p. 199-212 14 p.

Research output: Contribution to journalConference article

10 Scopus citations

Dynamic behaviour of dagger-shaped cantilevers for atomic force microscopy

Shen, K., Hurley, D. C. & Turner, J. A., Nov 1 2004, In : Nanotechnology. 15, 11, p. 1582-1589 8 p.

Research output: Contribution to journalArticle

35 Scopus citations

Dynamic fracture analysis of aged glassy polycarbonate by the method of caustics

Gao, G., Li, Z. & Negahban, M., Oct 1 2013, In : Acta Mechanica Solida Sinica. 26, 5, p. 448-457 10 p.

Research output: Contribution to journalArticle

7 Scopus citations

Dynamic mechanical spectroscopy of polyethylenes with aggregating disperse and hybrid granular-fibrous fillers

Dzenis, Y. A., Polozov, B. V. & Sazhina, A. B., Jul 1 1990, In : Mechanics of Composite Materials. 25, 4, p. 417-423 7 p.

Research output: Contribution to journalArticle

1 Scopus citations

Dynamic model for material removal in ultrasonic machining

Wang, Z. Y. & Rajurkar, K. P., Jan 1 1995, In : American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 208, p. 115-125 11 p.

Research output: Contribution to journalConference article

3 Scopus citations

Dynamic reconfiguration in modular robots using graph partitioning-based coalitions

Dasgupta, P., Ufimtsev, V., Nelson, C. & Hossain, S. G. M., Jan 1 2012, p. 488-495. 8 p.

Research output: Contribution to conferencePaper

11 Scopus citations

Dynamic response of brain subjected to blast loadings: Influence of frequency ranges

Chafi, M. S., Ganpule, S., Gu, L. & Chandra, N., Dec 1 2011, In : International Journal of Applied Mechanics. 3, 4, p. 803-823 21 p.

Research output: Contribution to journalArticle

22 Scopus citations

Dynamics modeling signaling pathway regulating egf-induced cell adhesion

Yang, R., Xi, N., Song, B., Sun, Z., Chen, L., Garcia, M. P. & Xi, J., Jan 1 2014, 19th IFAC World Congress IFAC 2014, Proceedings. Xia, X. & Boje, E. (eds.). IFAC Secretariat, p. 7486-7491 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic speed and sensor rate adjustment for mobile robotic systems

Qadi, A., Goddard, S., Huang, J. & Farritor, S., Oct 23 2007, Proceedings - 19th Euromicro Conference on Real-Time Systems, ECRTS 2007. p. 93-102 10 p. 4271684. (Proceedings - Euromicro Conference on Real-Time Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Edge-cracked orthotropic bimaterial butt joint under antiplane singularity

Wu, X. F., Dzenis, Y. A. & Gokdag, E., Jan 1 2004, In : International Journal of Nonlinear Sciences and Numerical Simulation. 5, 4, p. 347-354 8 p.

Research output: Contribution to journalArticle

5 Scopus citations

Effectiveness of flame weeding and cultivation for weed control in organic maize

Stepanovic, S., Datta, A., Neilson, B., Bruening, C., Shapiro, C. A., Gogos, G. & Knezevic, S. Z., Jan 1 2016, In : Biological Agriculture and Horticulture. 32, 1, p. 47-62 16 p.

Research output: Contribution to journalArticle

7 Scopus citations
5 Scopus citations

Effect of adhesive flaws on the strength of adhesive joints

Hua, Y. & Gu, L., Jan 1 2013, Energy. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 6 B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Effect of cold storage on mechanical properties of aorta

Zhao, S., Kutty, S., Lof, J. & Gu, L., Jan 1 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of culture on web usability: A study of three popular sites

Qing, Z., Vikram, S. & Bishu, R. R., Dec 1 2010, Proceedings - APCHI-ERGOFUTURE 2010. p. 16-20 5 p. (Proceedings - APCHI-ERGOFUTURE 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of Electrical Discharge Machining on the Surface Integrity of Copper Beryllium Alloys

Guha, A. & Rajurkar, K. P., Dec 1 1998, In : VDI Berichte. 1405, p. 309-319 11 p.

Research output: Contribution to journalArticle

2 Scopus citations

Effect of grain size on ECM performance

Rajurkar, K. P. & Hewidy, M. S., Aug 1988, In : Journal of Mechanical Working Technology. 17, C, p. 315-324 10 p.

Research output: Contribution to journalArticle

6 Scopus citations

Effect of grain size on wire electrical discharge machining of polycrystalline diamond

Wang, S. Z., Rajurkar, K. P. & Kozak, J., Jun 1 1993, NIST Special Publication. 847 ed. Publ by Natl Inst of Standards & Technology, p. 535-542 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Scopus citations

Effect of gravity on methanol diffusion flames burning within a forced convective environment

Raghavan, V., Gogos, G., Babu, V. & Sundararajan, T., Jul 1 2006, In : International Communications in Heat and Mass Transfer. 33, 6, p. 686-697 12 p.

Research output: Contribution to journalArticle

6 Scopus citations

EFFECT OF GROUPING ON DISPLAY FORMAT.

Bishu, R. R. & Drury, C. G., Dec 1 1986, p. 1509-1513. 5 p.

Research output: Contribution to conferencePaper

Effect of handle design and target location on insertion and aim with a laparoscopic surgical tool

Trejo, A., Jung, M. C., Oleynikov, D. & Hallbeck, M. S., Nov 2007, In : Applied Ergonomics. 38, 6, p. 745-753 9 p.

Research output: Contribution to journalArticle

39 Scopus citations

Effect of initial imperfections of struts on the mechanical behavior of tensegrity structures

Cai, J., Yang, R., Wang, X. & Feng, J., Jan 1 2019, In : Composite Structures. 207, p. 871-876 6 p.

Research output: Contribution to journalArticle

7 Scopus citations

Effect of interface geometry on fracture parameters at corrugated interfaces

Desyatova, A. S. & Dzenis, Y. A., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 219-220 2 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of loading parameters on damage-induced shear-extension coupling in laminate

Dzenis, Y. A. & Joshi, S. P., Jan 1 1997, In : AIAA Journal. 35, 3, p. 578-580 3 p.

Research output: Contribution to journalArticle

Effect of non-luminous flame radiation during methanol droplet combustion

Raghavan, V., Pope, D. N. & Gogos, G., Mar 1 2008, In : Combustion Science and Technology. 180, 3, p. 546-564 19 p.

Research output: Contribution to journalArticle

6 Scopus citations
1 Scopus citations

Effect of R.F. control and orbital motion on surface integrity of EDM components

Rajurkar, K. P. & Royo, G. F., Sep 1989, In : Journal of Mechanical Working Technology. 20, C, p. 341-352 12 p.

Research output: Contribution to journalArticle

19 Scopus citations

Effect of robotic manipulation on unidirectional barbed suture integrity: Evaluation of tensile strength and sliding force

Kaushik, D., Clay, K., Hossain, S. G. M., Park, E., Nelson, C. A. & LaGrange, C. A., Jun 1 2012, In : Journal of Endourology. 26, 6, p. 711-715 5 p.

Research output: Contribution to journalArticle

2 Scopus citations

Effect of strain rate on the mechanical behavior of 10-micron long polymeric nanofibers

Naraghi, M., Chasiotis, I., Dzenis, Y., Wen, Y. & Kahn, H., Dec 1 2006, Responsive Soft Matter: Chemistry and Physics for Assemblages, Films and Forms. p. 70-76 7 p. (Materials Research Society Symposium Proceedings; vol. 948).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of surface nanoscale topography on elastic modulus of individual osteoblastic cells as determined by atomic force microscopy

Hansen, J. C., Yul Lim, J., Xu, L. C., Siedlecki, C. A., Mauger, D. T. & Donahue, H. J., Sep 17 2007, In : Journal of Biomechanics. 40, 13, p. 2865-2871 7 p.

Research output: Contribution to journalArticle

65 Scopus citations

Effect of task difficulty on fault diagnosis strategy

Chin, A. & Bishu, R. R., Dec 1 1994, In : Proceedings of the Human Factors and Ergonomics Society. 2

Research output: Contribution to journalConference article

Effect of the patch material and dimension on the vascular mechanics after aortic coarctation repair surgery

Li, Z., Zhao, S., Abdullah, I., Kutty, S. & Gu, L., Jan 1 2015, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of topology and material properties on the imprint quality of the femtosecond-laser-induced surface structures

Song, Y., Tsubaki, A., Zuhlke, C., Rezaei, E., Gogos, G., Alexander, D. R. & Shield, J. E., Mar 1 2018, In : Journal of Materials Science. 53, 5, p. 3836-3845 10 p.

Research output: Contribution to journalArticle

1 Scopus citations

Effect of ultrasound stimulation on the biosynthetic activity of chondrocyte in cell-seeded matrices

Hasanova, G., Noriega, S., Turner, J. & Subramanian, A., Nov 1 2007, In : European Cells and Materials. 14, SUPPL.3, 1 p.

Research output: Contribution to journalArticle

1 Scopus citations