Mechanical & Materials Engineering

Research Output

2015

Regional responses of rat brain to impactor parameters

Hua, Y., Akula, P., Kelso, M. & Gu, L., Jan 1 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Relevance of Blood Vessel Networks in Blast-Induced Traumatic Brain Injury

Hua, Y., Lin, S. & Gu, L., Jan 1 2015, In : Computational and Mathematical Methods in Medicine. 2015, 928236.

Research output: Contribution to journalArticle

4 Scopus citations

Role of interphase in the mechanical behavior of silica/epoxy resin nanocomposites

Hua, Y., Gu, L., Premaraj, S. & Zhang, X., Jan 1 2015, In : Materials. 8, 6, p. 3519-3531 13 p.

Research output: Contribution to journalArticle

14 Scopus citations

SAGES TAVAC safety and effectiveness analysis: da Vinci® Surgical System (Intuitive Surgical, Sunnyvale, CA)

Tsuda, S., Oleynikov, D., Gould, J., Azagury, D., Sandler, B., Hutter, M., Ross, S., Haas, E., Brody, F. & Satava, R., Oct 29 2015, In : Surgical endoscopy. 29, 10, p. 2873-2884 12 p.

Research output: Contribution to journalArticle

29 Scopus citations

Self-propelled droplets on heated surfaces with angled self-assembled micro/nanostructures

Kruse, C., Somanas, I., Anderson, T., Wilson, C., Zuhlke, C., Alexander, D., Gogos, G. & Ndao, S., May 1 2015, In : Microfluidics and Nanofluidics. 18, 5-6, p. 1417-1424 8 p.

Research output: Contribution to journalArticle

14 Scopus citations

Semi-autonomous locomotion for diagnostic endoscopy device

Dehghani, H., Pourghodrat, A., Terry, B. S., Nelson, C. A., Oleynikov, D. & Dasgupta, P., Jan 1 2015, In : Journal of Medical Devices, Transactions of the ASME. 9, 3, 030931.

Research output: Contribution to journalArticle

4 Scopus citations
5 Scopus citations

Sensorless force sensing for minimally invasive surgery

Zhao, B. & Nelson, C. A., Jan 1 2015, In : Journal of Medical Devices, Transactions of the ASME. 9, 4, 041012.

Research output: Contribution to journalArticle

12 Scopus citations

Serpentine and leading-edge capillary pumps for microfluidic capillary systems

Safavieh, R., Tamayol, A. & Juncker, D., Jan 1 2015, In : Microfluidics and Nanofluidics. 18, 3, p. 357-366 10 p.

Research output: Contribution to journalArticle

18 Scopus citations

Shear stress-induced atherosclerotic plaque composition in ApoE-/- mice is modulated by connexin37

Pfenniger, A., Meens, M. J., Pedrigi, R. M., Foglia, B., Sutter, E., Pelli, G., Rochemont, V., Petrova, T. V., Krams, R. & Kwak, B. R., Nov 1 2015, In : Atherosclerosis. 243, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

12 Scopus citations

Smart flexible wound dressing with wireless drug delivery

Mostafalu, P., Amugothu, S., Tamayol, A., Bagherifard, S., Akbari, M., Dokmeci, M. R., Khademhosseini, A. & Sonkusale, S., Dec 4 2015, IEEE Biomedical Circuits and Systems Conference: Engineering for Healthy Minds and Able Bodies, BioCAS 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7348391. (IEEE Biomedical Circuits and Systems Conference: Engineering for Healthy Minds and Able Bodies, BioCAS 2015 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations

Spanning tree partitioning approach for configuration generation in modular robots

Dutta, A., Dasgupta, P., Baca, J. & Nelson, C., Jan 1 2015, Proceedings of the 28th International Florida Artificial Intelligence Research Society Conference, FLAIRS 2015. Eberle, W. & Russell, I. (eds.). AAAI Press, p. 360-365 6 p. (Proceedings of the 28th International Florida Artificial Intelligence Research Society Conference, FLAIRS 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

State-Of-Art, Challenges, and Outlook on Manufacturing of Cooling Holes for Turbine Blades

Li, Z. Y., Wei, X. T., Guo, Y. B. & Sealy, M. P., Jul 3 2015, In : Machining Science and Technology. 19, 3, p. 361-399 39 p.

Research output: Contribution to journalReview article

18 Scopus citations

Stress-dependent second-order grain statistics of polycrystals

Kube, C. M. & Turner, J. A., Oct 1 2015, In : Journal of the Acoustical Society of America. 138, 4, p. 2613-2625 13 p.

Research output: Contribution to journalArticle

5 Scopus citations

Superhydrophobic metallic surfaces functionalized via femtosecond laser surface processing for long term air film retention when submerged in liquid

Zuhlke, C. A., Anderson, T. P., Li, P., Lucis, M. J., Roth, N., Shield, J. E., Terry, B. & Alexander, D. R., Jan 1 2015, Laser-Based Micro- and Nanoprocessing IX. Klotzbach, U., Washio, K. & Arnold, C. B. (eds.). SPIE, 93510J. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9351).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels

Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N. & Khademhosseini, A., Dec 2015, In : Biomaterials. 73, p. 254-271 18 p.

Research output: Contribution to journalReview article

479 Scopus citations

Synthesis of a rehabilitation mechanism replicating normal gait

Nelson, C. A., Stolle, C. J., Burnfield, J. M. & Buster, T. W., Jan 1 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Telestration system for a remote controlled laparoscopic robot

Molacek, J., Dehghani, H., Bills, N., Oleynikov, D. & Terry, B. S., Jan 1 2015, In : Journal of Medical Devices, Transactions of the ASME. 9, 3, 030928.

Research output: Contribution to journalArticle

1 Scopus citations

Thermal stability of rare earth oxide coated superhydrophobic microstructured metallic surfaces

Hassebrook, A., Lucis, M. J., Shield, J. E., Zuhlke, C., Anderson, T., Alexander, D., Gogos, G. & Ndao, S., Jan 1 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, (ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
1 Scopus citations

Three-Dimensional Confocal Microscopy Indentation Method for Hydrogel Elasticity Measurement

Lee, D., Rahman, M. M., Zhou, Y. & Ryu, S., Sep 8 2015, In : Langmuir. 31, 35, p. 9684-9693 10 p.

Research output: Contribution to journalArticle

20 Scopus citations

Tool-tissue force estimation for a 3-DOF robotic surgical tool

Zhao, B. & Nelson, C. A., Jan 1 2015, 39th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Topological optimization of coronary stents

Zhao, S. & Gu, L., Jan 1 2015, 17th International Conference on Advanced Vehicle Technologies; 12th International Conference on Design Education; 8th Frontiers in Biomedical Devices. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Towards tuning the mechanical properties of three-dimensional collagen scaffolds using a coupled fiber-matrix model

Lin, S., Hapach, L. A., Reinhart-King, C. & Gu, L., Jan 1 2015, In : Materials. 8, 8, p. 5376-5384 9 p.

Research output: Contribution to journalArticle

6 Scopus citations

Tracking of spall deterioration on tapered roller bearings

Gonzalez, A., Tarawneh, C., Hu, P., Turner, J. A. & Wilson, B. M., Jan 1 2015, 2015 Joint Rail Conference, JRC 2015. American Society of Mechanical Engineers, (2015 Joint Rail Conference, JRC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Ultrasonic attenuation in polycrystals using a self-consistent approach

Kube, C. M. & Turner, J. A., Jan 1 2015, In : Wave Motion. 57, p. 182-193 12 p.

Research output: Contribution to journalArticle

13 Scopus citations

Voigt, Reuss, Hill, and self-consistent techniques for modeling ultrasonic scattering

Kube, C. M. & Turner, J. A., Jan 1 2015, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, Volume 34. Chimenti, D. E. & Bond, L. J. (eds.). American Institute of Physics Inc., p. 926-934 9 p. (AIP Conference Proceedings; vol. 1650).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations
2014

25th anniversary article: Rational design and applications of hydrogels in regenerative medicine

Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci-Unal, G., Dokmeci, M. R., Peppas, N. A. & Khademhosseini, A., Jan 8 2014, In : Advanced Materials. 26, 1, p. 85-124 40 p.

Research output: Contribution to journalReview article

582 Scopus citations

Advances in tribological testing of artificial joint biomaterials using multidirectional pin-on-disk testers

Baykal, D., Siskey, R. S., Haider, H., Saikko, V., Ahlroos, T. & Kurtz, S. M., Mar 1 2014, In : Journal of the Mechanical Behavior of Biomedical Materials. 31, p. 117-134 18 p.

Research output: Contribution to journalReview article

39 Scopus citations

A fast coalition structure search algorithm for modular robot reconfiguration planning under uncertainty

Dutta, A., Dasgupta, P., Baca, J. & Nelson, C., Jan 1 2014, Distributed Autonomous Robotic Systems - The 11th International Symposium. Chirikjian, G. & Ani Hsieh, M. (eds.). Springer Verlag, p. 177-191 15 p. (Springer Tracts in Advanced Robotics; vol. 104).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A hybrid PDMS/paper passive pump for slow-release/delivery of drugs in chronic dermal wounds

Rahimi, R., Ochoa, M., Zhou, J., Tamayol, A., Dokmeci, M. R., Khademhosseini, A., Ghaemmaghami, A. & Ziaie, B., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 2205-2207 3 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Altered mechanobiology of Schlemm's canal endothelial cells in glaucoma

Overby, D. R., Zhou, E. H., Vargas-Pinto, R., Pedrigi, R. M., Fuchshofer, R., Braakman, S. T., Gupta, R., Perkumas, K. M., Sherwood, J. M., Vahabikashi, A., Dang, Q., Kim, J. H., Ethier, C. R., Daniel Stamer, W., Fredberg, J. J. & Johnson, M., Sep 23 2014, In : Proceedings of the National Academy of Sciences of the United States of America. 111, 38, p. 13876-13881 6 p.

Research output: Contribution to journalArticle

57 Scopus citations
18 Scopus citations
1 Scopus citations

Anisotropic loss of toughness with physical aging of work toughened polycarbonate

Strabala, K., Meagher, S., Landais, C., Delbreilh, L., Negahban, M., Saiter, J. M., Turner, J., Ingram, A. & Golovchak, R., Apr 1 2014, In : Polymer Engineering and Science. 54, 4, p. 794-804 11 p.

Research output: Contribution to journalArticle

4 Scopus citations

A novel articulated drive mechanism for multifunctional NOTES robot

Shen, T., Warburton, K., Pourghodrat, A., Nelson, C. A. & Oleynikov, D., Jan 1 2014, In : Journal of Medical Devices, Transactions of the ASME. 8, 3, 030921.

Research output: Contribution to journalArticle

2 Scopus citations

A predictive model and validation of laser cutting of nitinol with a novel moving volumetric pulsed heat flux

Fu, C. H., Guo, Y. B. & Sealy, M. P., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 2926-2934 9 p.

Research output: Contribution to journalArticle

5 Scopus citations

A robust microfluidic platform for fabrication of meter-long hydrogel microfibers

Akbari, M., Serex, L., Lesha, E., Tamayol, A., Shin, S. R., Zhang, Y. S., Tarlan, F., Futamura, K. & Khademhosseini, A., Jan 1 2014, 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014. Chemical and Biological Microsystems Society, p. 2506-2507 2 p. (18th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A software tool for simulating motions and loading in planar tensegrity structures

Nelson, C. A., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A theoretical model to predict gas permeability for slip flow through a porous medium

Hooman, K., Tamayol, A., Dahari, M., Safaei, M. R., Togun, H. & Sadri, R., Sep 5 2014, In : Applied Thermal Engineering. 70, 1, p. 71-76 6 p.

Research output: Contribution to journalArticle

25 Scopus citations

Austenite-martensite phase transformation of biomedical Nitinol by ball burnishing

Fu, C. H., Sealy, M. P., Guo, Y. B. & Wei, X. T., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 3122-3130 9 p.

Research output: Contribution to journalArticle

13 Scopus citations

Biaxial mechanical properties of the human thoracic and abdominal aorta, common carotid, subclavian, renal and common iliac arteries

Kamenskiy, A., Dzenis, Y., Kazmi, S. A. J., Pemberton, M. A., Pipinos, I. I., Phillips, N. Y., Herber, K., Woodford, T., Bowen, R. E., Lomneth, C. S. & Mactaggart, J. N., Oct 7 2014, In : Biomechanics and Modeling in Mechanobiology. 13, 6, p. 1341-1359 19 p.

Research output: Contribution to journalArticle

38 Scopus citations

Biodegradable nanofibrous polymeric substrates for generating elastic and flexible electronics

Najafabadi, A. H., Tamayol, A., Annabi, N., Ochoa, M., Mostafalu, P., Akbari, M., Nikkhah, M., Rahimi, R., Dokmeci, M. R., Sonkusale, S., Ziaie, B. & Khademhosseini, A., Sep 3 2014, In : Advanced Materials. 26, 33, p. 5823-5830 8 p.

Research output: Contribution to journalArticle

71 Scopus citations

Biomechanical strain as a trigger for pore formation in Schlemm's canal endothelial cells

Braakman, S. T., Pedrigi, R. M., Read, A. T., Smith, J. A. E., Stamer, W. D., Ethier, C. R. & Overby, D. R., Oct 2014, In : Experimental Eye Research. 127, p. 224-235 12 p.

Research output: Contribution to journalArticle

17 Scopus citations

Biomimetic attachment to the gastrointestinal tract

Xie, W. & Terry, B. S., Jan 1 2014, In : Journal of Medical Devices, Transactions of the ASME. 8, 3, 030909.

Research output: Contribution to journalArticle

3 Scopus citations

Can surgical performance benchmarking be generalized across multiple outcomes databases: A comparison of University HealthSystem Consortium and National Surgical Quality Improvement Program

Simorov, A., Bills, N., Shostrom, V., Boilesen, E. & Oleynikov, D., Dec 1 2014, In : American journal of surgery. 208, 6, p. 942-948 7 p.

Research output: Contribution to journalArticle

14 Scopus citations

Closed-loop control and release mechanism development for microgravity free flyer

Reher, J., Yule, J., Fritz, E., Wheeler, M., Nelson, C. A. & Dungan, L. K., Jan 1 2014, 38th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite living fibers for creating tissue constructs using textile techniques

Akbari, M., Tamayol, A., Laforte, V., Annabi, N., Najafabadi, A. H., Khademhosseini, A. & Juncker, D., Jul 9 2014, In : Advanced Functional Materials. 24, 26, p. 4060-4067 8 p.

Research output: Contribution to journalArticle

82 Scopus citations

Compressive feedback-based motion control for nanomanipulation - Theory and applications

Song, B., Zhao, J., Xi, N., Chen, H., Lai, K. W. C., Yang, R. & Chen, L., Feb 2014, In : IEEE Transactions on Robotics. 30, 1, p. 103-114 12 p., 6689324.

Research output: Contribution to journalArticle

23 Scopus citations

Computational framework for modeling in-stent restenosis

Zhao, S. & Gu, L., Jan 1 2014, In : Journal of Medical Devices, Transactions of the ASME. 8, 2, 020947.

Research output: Contribution to journalArticle