Mechanical & Materials Engineering

Research Output 1977 2020

1977

FUNDAMENTAL STUDY ON COUNTERBORING.

Kahng, C. H. & Rajurkar, K. P., Jan 1 1977.

Research output: Contribution to conferencePaper

Economics
Experiments
2 Citations (Scopus)

FUNDAMENTAL THEORIES OF THE PARAMETERS OF EDM PROCESS.

Kahng, C. H. & Rajurkar, K. P., Jan 1 1977.

Research output: Contribution to conferencePaper

Electric discharge machining
Surface roughness
Nomograms
Electrodes
Boiling liquids
25 Citations (Scopus)

SURFACE CHARACTERISTICS BEHAVIOR DUE TO ROUGH AND FINE CUTTING BY EDM.

Kahng, C. H. & Rajurkar, K. P., Jan 1 1977, p. 77-82. 6 p.

Research output: Contribution to conferencePaper

Cracks
Metallography
Heat affected zone
Electron microscopes
Surface roughness
1978
5 Citations (Scopus)

MATHEMATICAL MODEL FOR ELECTRO-DISCHARGE MACHINED SURFACE ROUGHNESS.

Pandit, S. M. & Rajurkar, K. P., Jan 1 1978, p. 339-345. 7 p.

Research output: Contribution to conferencePaper

Nomograms
Machining
Surface roughness
Mathematical models
Scanning electron microscopy
1979

CRATER GEOMETRY AND VOLUME FROM ELECTRO-DISCHARGE MACHINED SURFACE PROFILES BY DATA DEPENDENT SYSTEMS.

Pandit, S. M. & Rajurkar, K. P., Jan 1 1979, In : American Society of Mechanical Engineers (Paper). 79 -WA/PROD-17

Research output: Contribution to journalConference article

Surface discharges
Geometry
Surface measurement
Impulse response
Machining
1980
13 Citations (Scopus)

CRATER GEOMETRY AND VOLUME FROM ELECTRO-DISCHARGE MACHINED SURFACE PROFILES BY DATA DEPENDENT SYSTEMS.

Pandit, S. M. & Rajurkar, K. P., Jan 1 1980, In : Journal of engineering for industry. 102, 4, p. 289-295 7 p.

Research output: Contribution to journalArticle

Surface discharges
Nomograms
Geometry
Impulse response
Machining
19 Citations (Scopus)

Data Dependent Systems Approach to EDM Process Modeling from Surface Roughness Profiles

Pandit, S. M., Rajurkar, K. P. & Shaw, M. C., 1980, In : CIRP Annals - Manufacturing Technology. 29, 1, p. 107-112 6 p.

Research output: Contribution to journalArticle

Electric discharge machining
Surface roughness
Microcracks
Heat affected zone
Random processes
1981
37 Citations (Scopus)

Analysis of Electro Discharge Machining of Cemented Carbides

Pandit, S. M., Rajurkar, K. P. & Shaw, M. C., 1981, In : CIRP Annals - Manufacturing Technology. 30, 1, p. 111-116 6 p.

Research output: Contribution to journalArticle

Electric discharge machining
Carbides
Electric sparks
Materials properties
Machining

NEW APPROACH TO THERMAL MODELING APPLIED TO ELECTRO DISCHARGE MACHINING.

Pandit, S. M. & Rajurkar, K. P., Jan 1 1981, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Electric discharge machining
Hot Temperature
1983
50 Citations (Scopus)

A stochastic approach to thermal modeling applied to electro-discharge machining

Pandit, S. M. & Rajurkar, K. P., Aug 1983, In : Journal of Heat Transfer. 105, 3, p. 555-563 9 p.

Research output: Contribution to journalArticle

Electric discharge machining
machining
Melting
melting
Stochastic models
1 Citation (Scopus)

Data-dependent systems approach to solar energy simulation inputs

Pandit, S. M. & Rajurkar, K. P., Nov 1983, In : Journal of Solar Energy Engineering, Transactions of the ASME. 105, 4, p. 461-463 3 p.

Research output: Contribution to journalArticle

Solar energy
Incident solar radiation
Stochastic models
5 Citations (Scopus)

PULSE CURRENT SIGNAL AS A SENSOR FOR ON-LINE COMPUTER CONTROL OF EDM.

Rajurkar, K. P., Pandit, S. M. & Wittig, W. H., Dec 1 1983, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, 00001400, p. 379-385 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computer control
Sensors
1984
4 Citations (Scopus)

EXPERIMENTAL AND THEORETICAL INVESTIGATION OF EDM DEBRIS.

Rajurkar, K. P., Pandit, S. M. & Venkatapathy, B. R., Dec 1 1984, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, p. 241-246 6 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Debris
Computer control
Normal distribution
Erosion
1 Citation (Scopus)
Electric discharge machining
Cracks
Thermal stress
Temperature distribution
Systems analysis
26 Citations (Scopus)

QUANTITATIVE EXPRESSIONS FOR SOME ASPECTS OF SURFACE INTEGRITY OF ELECTRO DISCHARGE MACHINED COMPONENTS.

Rajurkar, K. P. & Pandit, S. M., Jan 1 1984, In : Journal of engineering for industry. 106, 2, p. 171-177 7 p.

Research output: Contribution to journalArticle

Electric discharge machining
Thermal stress
Temperature distribution
Systems analysis
Cracks
4 Citations (Scopus)

STOCHASTIC MODELING OF EDM FOR ON-LINE CONTROL.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1984, p. 436-441. 6 p.

Research output: Contribution to conferencePaper

Damping
Erosion
Electric potential
Hot Temperature

STOCHASTIC MODELING OF EDM WITH A VIEW TO OFF-LINE OPTIMIZATION.

Pandit, S. M., Venkatapathy, B. & Rajurkar, K. P., Jan 1 1984, Unknown Host Publication Title. p. 389-392 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1985
5 Citations (Scopus)

ADAPTIVE CONTROL OF EDM - TECHNOLOGY AND RESEARCH.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1985, Manufacturing Engineering Transactions. SME, North American Manufacturing Research Inst, p. 8-14 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric sparks
Monitoring
Electric potential
Costs
11 Citations (Scopus)

Data-Dependent Systems Approach to Short-Term Load Forecasting

Rajurkar, K. P. & Nissen, J. L., Jan 1 1985, In : IEEE Transactions on Systems, Man and Cybernetics. SMC-15, 4, p. 532-536 5 p.

Research output: Contribution to journalArticle

FORMATION AND EJECTION OF EDM DEBRIS.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1985, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Debris
Drop formation
Kinetic energy
Shock waves
Machining

FORMATION AND EJECTION OF EDM DEBRIS.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1985, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Debris
Drop formation
Kinetic energy
Shock waves
Machining
1 Citation (Scopus)

MULTIPLE SERIES MODELING AND FORECASTING OF SHORT-TERM LOAD DEMAND BY DATA DEPENDENT SYSTEMS.

Rajurkar, K. P. & Newill, R. E., Dec 1 1985, p. 448-452. 5 p.

Research output: Contribution to conferencePaper

10 Citations (Scopus)

SURFACE DAMAGE AND SHOCK WAVES IN EDM.

Rajurkar, K. P., Dec 1 1985, Manufacturing Engineering Transactions. SME North American Manufacturing Research Inst, p. 379-385 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Shock waves
Machining
Tool steel
Microhardness
1986
1 Citation (Scopus)

Analysis of grasp force degradation with commercially available gloves

Cochran, D. J., Albin, T. J., Bishu, R. R. & Riley, M. W., Jan 1 1986, In : [No source information available].

Research output: Contribution to journalArticle

Occupational diseases
Degradation
1 Citation (Scopus)

CONJUGATED HEAT TRANSFER FROM A STRIP HEATER WITH THE UNSTEADY SURFACE ELEMENT METHOD.

Cole, K. D. & Beck, J. V., Jan 1 1986, In : AIAA Paper.

Research output: Contribution to journalConference article

Anemometers
Nusselt number
Fluxes
Heat transfer
Geometry

DATA COMPRESSION TECHNIQUE FOR VISION SYSTEMS.

Rajurkar, K. P. & Roste, M. C., Dec 1 1986, Unknown Host Publication Title. Machine Vision Assoc of SME, p. 4. 109-4. 120

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Data compression
Computer vision
Computer integrated manufacturing
Image processing
Costs
10 Citations (Scopus)
Polymer Composites
fillers
Fillers
Aggregation
Polymers

EFFECT OF GROUPING ON DISPLAY FORMAT.

Bishu, R. R. & Drury, C. G., Dec 1 1986, p. 1509-1513. 5 p.

Research output: Contribution to conferencePaper

Display devices
Processing
27 Citations (Scopus)

FORMATION AND EJECTION OF EDM DEBRIS.

Rajurkar, K. P. & Pandit, S. M., Jan 1 1986, In : Journal of engineering for industry. 108, 1, p. 22-26 5 p.

Research output: Contribution to journalArticle

Debris
Particle size
Drop formation
Kinetic energy
Shock waves

SENSORS FOR FLEXIBLE COMPUTER-INTEGRATED MANUFACTURING SYSTEMS.

Rajurkar, K. P., Dec 1 1986, p. 1578-1582. 5 p.

Research output: Contribution to conferencePaper

Computer integrated manufacturing
Signal analysis
Sensors
Machining
Systems analysis
27 Citations (Scopus)

Thin-flame theory for the combustion of a moving liquid drop: Effects due to variable density

Gogos, G. & Sundararajan, T., Oct 1986, In : Journal of Fluid Mechanics. 171, p. 121-144 24 p.

Research output: Contribution to journalArticle

flames
Liquids
Drag
Evaporation
evaporation
1987
1 Citation (Scopus)

APPLICATION OF MULTI-OBJECTIVE OPTIMIZATION TECHNIQUES TO MANUFACTURING SYSTEMS.

Rajurkar, K. P., Navelkar, V. V. & Kamelian, Y., Dec 1 1987, p. 513-516. 4 p.

Research output: Contribution to conferencePaper

Electric discharge machining
Process planning
Multiobjective optimization
Expert systems
Machining

Conjugated heat transfer from a hot-film probe for transient air flow.

Cole, K. D. & Beck, J. V., Jan 1 1987, In : [No source information available].

Research output: Contribution to journalArticle

Laminar flow
Heat transfer
Steady flow
Unsteady flow
Air

CONJUGATED HEAT TRANSFER FROM A HOT-FILM PROBE FOR TRANSIENT AIR FLOW.

Cole, K. D. & Beck, J. V., Jan 1 1987, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Laminar flow
Heat transfer
Steady flow
Unsteady flow
Air
12 Citations (Scopus)

Conjugated heat transfer from a strip heater with the unsteady surface element method

Cole, K. D. & Beck, J. V., Jan 1 1987, In : Journal of Thermophysics and Heat Transfer. 1, 4, p. 348-354 7 p.

Research output: Contribution to journalArticle

heaters
strip
heat transfer
hot-film anemometers
air flow
1 Citation (Scopus)

MODELING OF SYSTEM DYNAMICS AND DISTURBANCE BY DATA DEPENDENT SYSTEMS.

Rajurkar, K. P., Abu-Hamda, A. H. & Navelkar, V. V., Dec 1 1987, p. 49-52. 4 p.

Research output: Contribution to conferencePaper

Dynamical systems
Differential equations
Heat exchangers
Linear systems
1988
18 Citations (Scopus)

A model for the evaporation of a slowly moving droplet

Gogos, G. & Ayyaswamy, P. S., Nov 1988, In : Combustion and Flame. 74, 2, p. 111-129 19 p.

Research output: Contribution to journalArticle

Evaporation
evaporation
drag coefficients
Drag coefficient
transient heating
17 Citations (Scopus)

Changes in material symmetry associated with deformation: Uniaxial extension

Wineman, A. S., Rajagopal, K. R. & Negahban, M., 1988, In : International Journal of Engineering Science. 26, 12, p. 1307-1318 12 p.

Research output: Contribution to journalArticle

Anisotropy
13 Citations (Scopus)

Conjugated heat transfer from a hot-film probe for transient air flow

Cole, K. D. & Beck, J. V., May 1988, In : Journal of Heat Transfer. 110, 2, p. 290-296 7 p.

Research output: Contribution to journalArticle

air flow
Laminar flow
heat transfer
Heat transfer
laminar flow
6 Citations (Scopus)

Effect of grain size on ECM performance

Rajurkar, K. P. & Hewidy, M. S., Aug 1988, In : Journal of Mechanical Working Technology. 17, C, p. 315-324 10 p.

Research output: Contribution to journalArticle

Machining
Anodes
Wavelength
Green's function
Decomposition
8 Citations (Scopus)

Improvement in EDM performance by R.F. control and orbital motion

Rajurkar, K. P. & Royo, G. F., Dec 1 1988, p. 51-62. 12 p.

Research output: Contribution to conferencePaper

Control systems
Retrofitting
Electric sparks
Machining
Monitoring
19 Citations (Scopus)

Information processing in assembly tasks - a case study

Bishu, R. R. & Drury, C. G., Jun 1988, In : Applied Ergonomics. 19, 2, p. 90-98 9 p.

Research output: Contribution to journalArticle

Information Theory
information theory
Electric wiring
Automatic Data Processing
information processing
3 Citations (Scopus)

Prediction of the deformation properties of a polymeric composite with a granular-fibrous filler

Dzenis, Y. A. & Maksimov, R. D., Sep 1 1988, In : Mechanics of Composite Materials. 23, 5, p. 644-654 11 p.

Research output: Contribution to journalArticle

fillers
Fillers
Composite
Fiber
composite materials
8 Citations (Scopus)

RECENT PROGRESS IN ELECTRICAL DISCHARGE MACHINE TECHNOLOGY AND RESEARCH.

Rajurkar, K. P. & Pandit, S. M., Jan 1 1988, p. v ip.

Research output: Contribution to conferencePaper

Electric discharge machining
Monitoring
Hot Temperature
17 Citations (Scopus)

Some Aspects of ECM Performance and Control

Rajurkar, K. P., Schnacker, C. L. & Lindsay, R. P., 1988, In : CIRP Annals - Manufacturing Technology. 37, 1, p. 183-186 4 p.

Research output: Contribution to journalArticle

Machining
Electric sparks
Decomposition
Wavelength
Electrodes
1989
2 Citations (Scopus)

Advances in technology and research of EDM

Rajurkar, K. P., Dec 1 1989, In : SME Technical Paper (Series) MR. p. var paging Mr89-425

Research output: Contribution to journalArticle

Electric discharge machining
Electrodes
Expert systems
Wear of materials
Corrosion
54 Citations (Scopus)

A New Model Reference Adaptive Control of EDM

Rajurkar, K. P., Wang, W. M. & Lindsay, R. P., 1989, In : CIRP Annals - Manufacturing Technology. 38, 1, p. 183-186 4 p.

Research output: Contribution to journalArticle

Model reference adaptive control
Adaptive control systems
Machining
Digital control systems
Networks (circuits)
19 Citations (Scopus)

Effect of R.F. control and orbital motion on surface integrity of EDM components

Rajurkar, K. P. & Royo, G. F., Sep 1989, In : Journal of Mechanical Working Technology. 20, C, p. 341-352 12 p.

Research output: Contribution to journalArticle

Control systems
Titanium carbide
Monitoring
Steel
Machining
8 Citations (Scopus)

Learning and transfer effects in simulated industrial information processing tasks

Bishu, R. R. & Chen, Y., Nov 1989, In : International Journal of Industrial Ergonomics. 4, 3, p. 237-243 7 p.

Research output: Contribution to journalArticle

Automatic Data Processing
information processing
Learning
learning
Experiments
14 Citations (Scopus)
Symmetry Group
Anisotropy
Symmetry
anisotropy
Configuration